Holes bored for cables in wood members must have edges that are ________ the nearest edge of the wood member.

Holes bored for cables in wood members must have edges that are ________ the nearest edge of the wood member.

• A. not less than 1¼ in. from
• B. immediately adjacent to
• C. not less than 1 sixteenth in. from
• D. 90° away from

Answer: (A)

The requirement that holes bored for cables in wood members must have edges that are not less than 1¼ inches from the nearest edge of the wood member is established to ensure the safety and integrity of the structural component and the wiring. This distance is critical for several reasons: 1. **Preventing Damage**: The specified distance helps prevent mechanical damage to the cables. If holes are too close to the edges, there is an increased risk of the cables being cut or damaged due to stress or movement of the wood, especially in situations where the wood might expand or contract. 2. **Maintaining Structural Integrity**: Boring holes too close to the edge can compromise the structural integrity of the wood member itself. Ensuring that holes are located at least 1¼ inches from the edge helps maintain the wood's strength and load-bearing capacity. 3. **Compliance with Codes**: This requirement is in line with electrical codes that provide guidelines for safe wiring practices. Following these codes helps to minimize hazards, such as electrical shorts or fires, that could arise from improperly installed wiring. The other choices do not provide the necessary protection or code compliance. For instance, being immediately adjacent would pose a significant risk of damage, while options indicating minimal distance or specific

The requirement that holes bored for cables in wood members must have edges that are not less than 1¼ inches from the nearest edge of the wood member is established to ensure the safety and integrity of the structural component and the wiring. This distance is critical for several reasons:

1. Preventing Damage: The specified distance helps prevent mechanical damage to the cables. If holes are too close to the edges, there is an increased risk of the cables being cut or damaged due to stress or movement of the wood, especially in situations where the wood might expand or contract.

2. Maintaining Structural Integrity: Boring holes too close to the edge can compromise the structural integrity of the wood member itself. Ensuring that holes are located at least 1¼ inches from the edge helps maintain the wood's strength and load-bearing capacity.

3. Compliance with Codes: This requirement is in line with electrical codes that provide guidelines for safe wiring practices. Following these codes helps to minimize hazards, such as electrical shorts or fires, that could arise from improperly installed wiring.

The other choices do not provide the necessary protection or code compliance. For instance, being immediately adjacent would pose a significant risk of damage, while options indicating minimal distance or specific